Goose neck press brake upper punch
- Description
Specification:
Material | 42CrMo=SCM440=42CrMo4=4140 |
General Hardness | 47+/-2HRC |
Holistic heat treatment | Quenching + Tempering+ 860 °C Oil quenching+ 390°C Tempering |
Surface Tolerance | 0.02mm |
Sectioned | AVAILABLE |
Certification | ISO9001:2008 |
Supplying Brands | Amada, Tokyo,Trumpf, LVD, YSD, Beyeler, etc. |
OEM & ODM Service | AVAILABLE |
CUSTOMIZE & DESIGN Service | AVAILABLE |
Tool Refurbishment Service | ACCEPTABLE |
Advantages:
Our superior craftsmanship in manufacturing press brake tools will make you to be the best fabricators in the world. Our products features designed to high endurance surface enhancement extend the life of your tooling.
- Most tools can be easily loaded by a single operator.
- Easy to store
- All sectionalized tools come pre-cut in different pieces.
- Most sectionalized punches include two ear pieces (horns)
- Nitrex (HRC-70) is standard on every punch in the tooling line.
- Special tooling available
Material:
Press Brake Tooling |
|
Material1 |
42CrMo |
Heat treatment |
HRC 47+/- 2° & Ground |
Material2 |
Cr12Mov |
Heat treatment |
HRC 60°- 62° & Ground |
Remark:
1. 42CrMo = SCM440 = 42 CrMo4= 4140
The Chemical Composition of 42CrMo
C |
Si |
Mn |
Mo |
Cr |
S |
Ni |
Cu |
P |
0.38-0.45 |
0.17-0.37 |
0.5-0.8 |
0.15-0.25 |
0.9-1.2 |
≤0.035 |
≤0.3 |
≤0.3 |
≤0.035 |
HRC 47+/- 2°
2. Cr12Mov = SKD11
The Chemical Composition of Cr12Mov
C |
Si |
Mn |
Cr |
Mo |
P |
S |
V |
1.45~1.7 |
≤0.4 |
≤0.35 |
11.0~12.5 |
0.4~0.6 |
≤0.03 |
≤0.03 |
0.15~0.3 |
HRC60°-62
Thickness can be processed for Hot-Rolled Steel & cold rolled steel:3 – 6 mm
3. Other material LD = D2 = DC53 is available for us too.